Control Panel And Display - Hitachi SF-250ZFVAD Instruction Manual

Control Panel and Display

NOTICE
● Directly touch the buttons on the Control Panel with your bare fi nger.
● If you fi nd water drops, detergent or other foreign substances on the Glass Lid, please clean them up
with a dry cloth.
For model:
14
SF-250ZFVAD
SF-220ZFVAD
12 11
Power button
Start/Pause button
Shower Plus button
Water Power button
Program button
Memory button
10
13 7
10 9
Press this button to switch power on and off (when power on, please hold
1sec and display
switches off when operations are fi nished. The washing machine also turns
off automatically if it is not operated or no button is pressed for 10 minutes
after the power has been turned on.
Press this button to start or pause the operation. When the washing machine
is paused for over twenty-four hours without any operations, it turns off
automatically.
To add the water shower during the operation, press this button. Extra
amount of water supplied depends on load amount or program. If you want to
cancel this option, press this button again.
This function is available during the washing and normal rinsing processes.
This button does not function if the water level has already reached at the
highest level of each program.
The strength of the water fl ow changes each time this button is pressed.
Water fl ow strength is shown on the Water Level/Timer indicator.
(0: normal, 1: strong, 2: stronger, -1: weak, -2: weaker)
This function is available during the washing and normal rinsing processes.
Press this button to select the program. The program changes each time the
button is pressed.
To record your customized washing course, press this button for more than
3 seconds after selecting each detail such as water level, wash time, rinse
time and spin time. From the next laundry, you can recall this memorized
course just by pressing this button after turning the Washing Machine on.
6 1 2
4 3
8
is on). The washing machine automatically
5