Technical Data - Bang & Olufsen BeoCom 1 User Manual

58
BeoCom 1 is intended for use on
the public analogue network. The
phone supports Caller ID, provided
you have the proper subscription
with your telephone company. Not
all supplementary services offered
by the different service providers
are available in all countries.
The phone can only be expected to
function in the country for which it
was manufactured, as transmission
systems, legal requirements and
automated services may vary from
country to country. The packaging
will state for which country your
BeoCom 1 is manufactured. The
national identity letters can be
found above the lowest bar code
on the label.
If you are in any doubt about the
use of your BeoCom 1, please
contact your retailer for further
information.
Important information about BeoCom 1

Technical data

Number of handsets per base:
8
Talk time per charging:
10 hours
Standby time per charging:
150 hours
Charging time:
4 hours
Range:
The phone has an indoor range of up to 165 feet (50 metres), and an
outdoor range of up to 1000 feet (300 metres). However, both figures
are dependent on conditions
System:
2.4 GHz (CAT)
Power supply, Base:
120V AC / 6.0V DC power outlet adaptor
Power supply, Charger:
120V AC / 5.6V DC power outlet adaptor
Power supply, Handset:
NiMH batteries, 720 mAh
Power output:
(EIRP) 250 mW/10 mW
Temperature and humidity:
The phone should be placed in surroundings with an ambient
temperature of 32–113° F (0–45° C) and a relative humidity of 15 –
95%
Display:
Alpha numeric display with 2 lines of 16 characters each
Indicator light, handset:
Red
Indicator light, BeoLine base:
Red/Green