Call Another Handset - Bang & Olufsen BeoCom 1 User Manual

48
The phone system allows up to one
internal call and two external calls
to take place at the same time.
You can use three different ringing
signals to identify calls on line 1,
calls on line 2, and internal calls.
For further information, refer to the
chapter Preference settings on
page 53.
If you misplace a handset, you may
be able to locate it by making a call
to that handset.
If you have an active call and
another handset elsewhere in the
system is taken off the hook, your
handset emits a single, short beep
to notify you that a third party has
joined the call. This, however, only
happens if the system handsets are
using the same line at the time.
>> System use with several handsets

Call another handset

You can call one handset or call all handsets simultaneously. If you
call all handsets, the handset that responds first receives the call. If
you call one handset, the display shows which handset has been
called.
To call a handset...
INT
1 – 8
Living room
3
To call all handsets...
INT
To end a call...
Press to make an internal call
Press the number of the handset and the call is
made automatically. Alternatively...
...turn the wheel to search through the internal
listing of handsets and press
If the internal call can not be made, you will hear
a busy signal
Press to make an internal call
Press to call all handsets
Press to end a call
to make the call.