Battery Status; Replace The Battery - Bang & Olufsen BeoCom 1 User Manual

Battery status

The battery indicator in the display shows the charge level of the
handset battery. If the batteries require charging, this appears
automatically in the display and the handset warns you with an
audible signal.
To display the battery status...
OK
OK
Battery status
===

Replace the battery

To remove the battery...
> Remove the battery cover; press the cover lightly and slide it off.
> Remove the battery and pull out the battery plug.
To insert a new battery...
> Insert the battery plug (A) and place the battery and the cords as
shown.
> Replace the battery cover, make sure that the tabs and the slots snap
into place correctly at the top and bottom of the cover.
If the battery in the handset is replaced with a new battery, please follow
the instructions accompanying the new battery.
Press while the handset is in standby
Turn the wheel until Battery status is shown and
press OK. The current charge level appears in the
display
Battery status
============ 0%
=========== 10%
========= 25%
====== 50%
=== 75%
100%
A
17