Bang & Olufsen BeoCom 1 User Manual page 15

Troubleshooting via the display – the Alert menu
If conditions exist which impede or otherwise affect the optimal use of
your phone, Alert appears in the display while the handset is in standby
and remains as long as the conditions apply.
'Alert' appears in the display...
OK
s t
The clock has
not been set
OK
Set time
11:20 AM
OK
Messages that can appear in standby – a summary
1:Living room
Oct 24 8:50 AM
Register
handset to base?
s t
Alert
View?
s t
2 new calls
View?
1:Living room
Silenced
1:Line is busy
Oct 24 8:50 AM
1:Line on hold
Oct 24 8:50 AM
Press to be able to view the cause of the alert
Turn the wheel to see if other conditions apply
Press to be able to adjust relevant settings, if
available
Turn the wheel to adjust settings, and press OK
to store them
The handset is in standby and line 1 is selected –
normal display
The handset is not registered to a base. Press OK
to start the first-time setup procedure
Refer to the description above
2 unanswered calls received. Refer to the
opposite page for more information
The handset is silenced
Line 1 is busy. Press , then OK to 'break in' on
the call
Another handset has a call on hold on line 1.
Press to transfer the call to your handset
s t
Alert
View?
s t
No contact
with base
s t
No dial tone
Line 1
s t
Battery needs
recharging
s t
The clock has
not been set
If you wish to bring up the main
menu without viewing the alert,
simply turn the wheel.
15