Set The Time And Date; Preset Volume For Conversations; Display New Calls - Bang & Olufsen BeoCom 3 User Manual

22

Set the time and date

The built-in clock ensures that timer
settings for the ringing signal are executed
correctly, and that Caller ID information
includes the correct date and time of the
call.
Time : 12:29AM
Date : Mar. 9 - 2002
Menu Press to view the main menu
Turn the wheel to select 'Setup
OK menu' and press OK
Turn the wheel to select
OK 'Clock' and press OK
Turn the wheel to select either
OK 'Time' or 'Date' and press OK
Turn the wheel to select the
OK individual settings, and press
OK to move on to the next
When you have entered the
last setting, 'Store?' appears in
the display
OK Press to store the setting
>>Settings for your BeoCom 3 – Set the time and date

Preset volume for conversations

The sound volume can be set to one of
eight fixed levels. This volume then applies
to the handset, the speaker and any
connected headset. Note that you can still
adjust sound volume during a call.
Clock
On
Off
Menu
OK
OK
OK
OK
Preset volume level
Start calls at
preset volume level
Press to view the main menu
Turn the wheel to select 'Setup
menu' and press OK
Turn the wheel to select
'Preset volume' and press OK
Turn the wheel to select 'Yes'
if you wish a preset volume, or
'No' if you do not
Press OK
If you chose 'Yes', turn the
wheel to adjust the volume
setting
Press to store the setting

Display new calls

You can choose not to display information
about new calls, if e.g. you have a phone
with Caller ID connected to the same line
as BeoCom 3.
Caller ID indication
On
Off
Indicate new calls
Menu Press to view the main menu
Turn the wheel to select 'Setup
OK menu' and press OK
Turn the wheel to select 'Caller
OK ID indication' and press OK
Turn the wheel to choose line
OK 1 or line 2 and press OK
Turn the wheel to select 'On' if
you wish to see new calls, or
'Off' if you do not
OK Press OK
Repeat the procedure for each
line