Conference Calls; A 2-Line Conference Call; Three-Way Call - Conference Call On One Line - Bang & Olufsen BeoCom 3 User Manual

20
BeoCom 3 makes it possible for
you to include multiple calls in a
conference call.
You can combine calls on line 1
and line 2 to a conference call,
and you can combine calls on the
same line to a conference call as
well. However, to combine calls
on the same line, you must have a
subscription to your phone
company's Three-Way Call service
for that line.
A three-way call on one line can
be combined with a single active
call on the other line for a
fourway conference call. Three-
way calls on both line 1 and line 2
can also be combined to a five-
way conference call.
If you choose to make a
three-way call part of a larger
conference call, please note that
you must initiate all the calls in
the three-way call.

Conference calls

A 2-line conference call

When you have simultaneous calls on both
line 1 and line 2, you can connect the calls
and establish a conference call.
Aug. 21 11:21AM
Allen Anderson
1 847 555 1234
Jennifer Jones
1 847 555 4321
You have simultaneous calls on both lines...
Extra Press to be able to connect the
calls
OK Press to include the selected
calls in a conference
Place the handset in the cup to
end all calls, or press the line
buttons to return callers to
separate lines. You can then
continue or end calls as you
choose
You can also create a conference call by
pressing the Line 1 and Line 2 buttons
simultaneously. All parties on both lines are
then included in the conference call.
Please note that external parties in a conference
call will hear each other only faintly if they are
located far from the telephone exchange. This
network problem can be reduced by subscribing
to the Three-Way Call service with your
telephone company.
Three-way call – conference call
on one line
When you establish a three-way call, the
first call made can be an incoming or
outgoing call, but you must initiate the
second call yourself. Please contact your
phone company for more information
about the Three-Way Call service.
You have a call on e.g. Line 1...
> Press the Flash button to place the active call
on hold and start a new call.
> Place a call to the third party in your
threeway call.
> When the third party answers the call, press
Flash again to start a conference call.
> To end the conference call, press Flash a third
time. The third party is disconnected and you
can continue the original call.
> Place the phone in the cup to end the call
completely.