And The Mains; Connect And Use A Headset - Bang & Olufsen BeoCom 3 User Manual

6
Place and connect the phone as
described to the right. In case of a
power failure, BeoCom 3 can be
used for outgoing calls on line 1.
BeoCom 3 supports the use of a
headset. You can switch between
handset, headset, and hands-free
use at any time.
Please note that BeoCom 3 can
only be expected to function in
country for which it was
manufactured, as transmission
systems, legal requirements for
approval and supplementary
services may vary from country to
country. The packaging states the
country for which your BeoCom 3
is manufactured. The national
identity letters can be found above
the bar code on the label.
If you require further instruction or
information about the connection
and use of BeoCom 3, please
contact your Bang & Olufsen retailer.
Connect your BeoCom 3
Placement
BeoCom 3 should not be placed in damp,
dusty or polluted surroundings and should
not be directly exposed to liquids or
sunlight.
BeoCom 3 is designed for use in dry, domestic
environments only, with temperatures of
50–104°F (10–40°C) and relative humidity of
15–95%.
Connection
To be able to use your BeoCom 3, you must
connect it to your telephone line (or lines)
and to the mains.
> If you have one phone line socket, connect
the phone plug directly to this socket. If you
have separate sockets for your phone lines,
please refer to the illustration enclosed with
the extra two-plug extension.
> Connect the adapter to the mains.

Connect and use a headset

Connect a headset to the socket on the
right side of the BeoCom 3 console.
Make a call using a headset
0 – 9 Enter the phone number
Headset Press to make a headset call
Headset Press to end your call
An optional headset can be purchased from
your Bang & Olufsen retailer.
Please clean your BeoCom 3 using a soft,
damp cloth with a few drops of mild
detergent added.
C
OK
When you connect or disconnect a headset,
'Headset connected' or 'Headset disconnected'
appears briefly in the BeoCom 3 display.