Unpacking Your Dryer; Choosing A Location - Insignia NS-TDRE67W1 User Manual

Unpacking your dryer

WARNING:
• Packing materials can be dangerous to children. Keep all packing materials
(such as plastic bags and polystyrene) out of the reach of children.
• Unpack your dryer and inspect it for shipping damage. Make sure that you
have received all the items shown in Package contents on page 7.
• To prevent personal injury or strain, wear protective gloves and use a furniture
mover whenever lifting or carrying your dryer.

Choosing a location

• Clothes dryer installation must be performed by a qualified installer.
• Install the clothes dryer according to the manufacturer's instructions
and local codes.
• Do not install a clothes dryer with flexible plastic venting materials. If
flexible metal (foil type) duct is installed, it must be of a specific type
identified by the appliance manufacturer as suitable for use with
clothes dryer. Flexible venting materials are known to collapse, be easily
crushed, and trap lint. These conditions will obstruct the clothes dryer's
airflow and increase the risk of fire.
• To reduce the risk of severe injury or death, follow all installation
instructions
• Save these instructions.
Read the following instructions carefully before installing the dryer.
These instructions should be kept for future reference.
• The dryer is not suitable for installation in a mobile home.
• Remove the door from all discarded appliances to avoid the danger of a
child being trapped and suffocating.
WARNING: Your dryer must be exhausted to the outside to reduce the risk of
fire when installed any place inside the house.
• You should locate your dryer where there is enough space at the front for
loading the dryer and enough space behind for the exhaust system.
• Your dryer is factory-ready for the rear exhaust option. If you want to change
the vent location, see Changing the dryer vent location (optional) on page 21
• Make sure that the room you install your dryer in has enough fresh air and that
there are no air-flow obstructions. The ambient temperature should not be
lower than 33° F (.6° C).
• For gas dryers, adequate clearance must be maintained as noted on the data
plate to ensure adequate air for combustion and the proper dryer operation.
10
WARNING
Fire Hazard
CAUTION
Important to installer
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS