Brinkmann Smoke 'N Pit OUTDOOR BARBECUE GRILL & SMOKER Owner's Manual page 5

Step 1
Choose a good assembly area and get a friend to help you put your
smoker together. Lay cardboard down to protect smoker finish and
assembly area.
Step 2
Stand the cooking chamber on its closed end with the door open. Make
sure that another person is holding the cooking chamber steady.
Step 3
Working from the top (open end of chamber), insert bolts into three
holes nearest open end of chamber. Attach legs to cooking chamber
using 4 x 1w" bolts, washers and nuts as illustrated. This level will hold
the charcoal pan.
Step 4
Attach end of legs to cooking chamber using 4 x w" bolts, washers and
nuts as illustrated.
Step 5
Insert the three 4 x 24" bolts into the 3 holes directly below and near-
est the legs as illustrated. Insert washer and nut and securely tighten all
three bolts. This level will hold the water pan and a cooking grill.
Step 6
Use 4 x 1w" bolts, washers and nuts for the next two levels of the
cooking chamber. These levels will hold the two remaining cooking
grills.
(Insert bolts here first)
4 x 1w"
Bolt
4 x w"
Bolt
4 x 24"
Bolt
4 x 1w"
Bolts
4