Christie M Series Instruction Sheet page 5

4. Lock the latch, refer to
projection lens when the latch is closed.
5. Focus the image, and if necessary unlock and rotate the Portrait Adapter to make sure the mirror
edge is aligned properly with the screen. NOTES: 1) Make sure the latch is fully locked when
complete. 2) For lens 118-100113-XX, it is necessary to unlock the Portrait Adapter to focus the
lens without rotating the Adapter.
6. Focus, zoom and offset the lens as necessary. NOTE: For some applications, it may be necessary
to boresight the lens mount with the Portrait Adapter installed, refer to the M Series User Manual
for details.
7. Using the on-screen menu, set the correct image orientation based on projector installation.
• To set the image orientation, select the M
> S
CREEN
Portrait Adapter Instruction Sheet
020-100304-02 Rev. 1 (10-2010)
Figure 8. NOTE: Make sure the the Portrait Adapter is fixed to the
Figure 8 - Latch Locked
.
I O
MAGE RIENTATION
M > C
AIN ENU ONFIGURATION
> O O
UTPUT PTIONS
5 of 5