3. Move the Portrait Adapter onto the end of the projection lens (see
Make sure the collar touches the end of the projection lens, see
Figure 7
for incorrect installation. NOTE: If necessary, cut a 1/2 inch strip of foam (supplied) and
apply to the colar of the portrait adapter to obtain a tight fit when the latch is closed.
Figure 6 - CORRECT Installation
4 of 5
Figure 5 - Mounting the Portrait Adapter
Figure
5).
Figure 6
for correct installation, and
Figure 7 - INCORRECT Installation
Portrait Adapter Instruction Sheet
020-100304-02 Rev. 1 (10-2010)