7�6�4 Submenu Dis; 7�6�5 Submenu Colr - TESTO 0555 6451 Operating Instructions Manual

Parameter Explanation and setting options
Hi�T max� value of the temperature measured in the process
Lo�P min� value of the pressure measured in the process
Hi�P max� value of the pressure measured in the process
7.6.4 Submenu DIS
Parameter Explanation and setting options
diS�L standard process value display
L1
L2�Temp = current process value for flow and temperature
L2�Pres = current process value for volumetric flow and pressure
L2�Totl
L3�TP
L4
diS�U update rate of display
d1 = high
d2 = medium
d3 = low
diS�R display rotation: 0°, 90°, 180°, 270°
diS�B display brightness: 25 %, 50 %, 75 %, 100 %, OFF (measured value
display in the RUN mode switched off)
7.6.5 Submenu COLR
Parameter Explanation and setting options
coL�F colour of the characters in the display for the flow rate value
cFH�F upper limit of the colour change for flow rate measurement
cFL�F lower limit of the colour change for flow rate measurement
coL�T colour of the characters in the display for the temperature value
cFH�T upper limit of the colour change for temperature measurement
cFL�T lower limit of the colour change for temperature measurement
coL�P colour of the characters in the display for the pressure value
cFH�P upper limit of the colour change for pressure measurement
cFL�P lower limit of the colour change for pressure measurement
= current process value for volumetric flow
= current process value for volumetric flow and totaliser
= current process value for volumetric flow and temperature and
pressure
= current process value for volumetric flow and temperature and
pressure and current totaliser value
UK
25