Bosch Professional GLM 40 Original Instructions Manual page 14

14 | English
The number of the measured value is displayed after "M", and the re-
spective measured value is displayed underneath.
Press the button (6) to browse forwards through the saved measured
values.
Press the button (3) to browse backwards through the saved meas-
ured values.
If no measured value is available in the memory, "0.000" is shown in the bottom line of
the display and "M 0" in the line above.
Deleting the memory
To delete the contents of the memory, first press the button (4) so that "M" appears on
the display. Then briefly press the on/off button (5) to delete the displayed measured
value.
Adding/subtracting measured values (see figure B)
Measured values can be added or subtracted only in length measurement. A warning sig-
nal will sound if you use it in other measuring functions.
To measure, briefly press the measuring button (2). The measured
value will be shown at the bottom of the display.
Press the button (6) to add measured values or press the button (3)
to subtract measured values. "+" or "–" will appear at the bottom of
the display. Take another measurement. The current measured value
will be shown at the bottom of the display, and the previous meas-
ured value will be shown above it.
Press the button (6) to add measured values or press the button (3)
to subtract measured values. The result will be shown at the bottom
of the display after "=", and the current measured value will be
shown above it.
Press the button (4) to exit addition/subtraction.
Changing the unit of measurement (3 601 K72 9K0, 3 601 K72 9C0)
Switch the measuring tool off.
1 609 92A 5DY | (02.07.2020) Bosch Power Tools