Bosch Professional GLM 40 Original Instructions Manual page 13

Then measure the width, length and depth one after the other as with a length measure-
ment. The first measured value will be shown at the bottom of the display. The laser
beam remains switched on between the three measurements.
After the third measurement has been completed, the volume will be
automatically calculated and displayed. The end result will be shown
at the bottom of the display, while the current measured value will be
shown above it.
Simple Pythagoras measurement
For simple Pythagoras measurements, repeatedly press the button (4) until the indicator
for single Pythagoras measurement
Make sure that there is a right angle between the sought distance (height) and the hori-
zontal distance (depth)! Then measure the depth and diagonal one after the other as
with a length measurement. The first measured value will be shown at the bottom of the
display. The laser beam remains switched on between the two measurements.
After the second measurement has been completed, the height will
be automatically calculated and displayed. The end result will be
shown at the bottom of the display, while the current measured value
will be shown above it.
Deleting measured values
In any measuring function, you can delete the most recently recorded individual meas-
ured value by briefly pressing the on/off button (5). Repeatedly pressing the on/off but-
ton (5) briefly will delete the measured values in reverse order.
Memory functions
Memory value display
The memory value display is only available when a length measurement has been per-
formed. Maximum 10 measured values can be retrieved.
To display memory values, repeatedly press the button (4) until "M" appears on the dis-
play (1).
Bosch Power Tools
appears on the display (1).
1 609 92A 5DY | (02.07.2020)
English | 13