Page 1
H-3630, H-3631 π 1-800-295-5510 H-3632, H-3633 uline.com STEEL ASSEMBLY TABLE TOOLS NEEDED 9/16" Wrench (2) ASSEMBLY INSTRUCTIONS HARDWARE INCLUDED ADjUSTING TABLE HEIGHT • (4) 3/8" x 3" Bolts Remove pre-installed leg bolt and adjust leg to desired table height. Reinstall leg bolt and nut.
Page 2
ADD-ON TABLE INSTRUCTIONS Figure 5 (2) 3/8 x 3/4" Bolts Starter Add-On and Nuts Table Table Flat Brace Starter Leg Brace Bolt HARDWARE INCLUDED 3. Unfold remaining flat braces on add-on table and line up with leg assembly on starter table. • (2) 3/8"...