Environmental Protection; Standard Spare Parts; Eu - Declaration Of Conformity; Petrol Lawn Mowers (Stihl Rm) - Stihl RM 2.0 R Instruction Manual

– Product modifications not approved by
STIHL.
– Use of fuel and lubricants not approved
by STIHL (lubricants, petrol and engine
oil, see engine manufacturer's
specifications).
– The use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality.
– Improper use of the product.
– Use of the product for sporting or
competitive events.
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
42
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.

15. Environmental protection

Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal ( 4.9).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.

16. Standard spare parts

Mowing blade:
6357 702 0102
Blade fastening screw:
9008 319 9028
Retaining washer:
0000 702 6600
The blade fastening screw and
retaining washer must be replaced
whenever replacing or installing the
blade. Spare parts are available
from a STIHL specialist dealer.
17. EU - Declaration of
conformity

17.1 Petrol lawn mowers (STIHL RM)

STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
the machine
manually operated lawn mower with
engine (STIHL RM)
manufacturer's STIHL
brand:
type: RM 2.0 R
RM 2.0 RC
RM 2.0 RT
serial number 6357
conforms to the following EC directives:
2000/14/EC, 2014/30/EU, 2006/42/EC,
2011/65/EU
The product has been developed in
conformity with the following standards:
EN ISO 5395-1, EN ISO 5395-2, EN
14982
The versions of the standards valid on the
production date apply to development and
production of the products.
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
0478 111 9944 B - EN