Technical Data WS5019 HOLMAN iWeather Weather Forecaster Thank you for purchasing this device, please read the operating instructions carefully to familarize yourself with the features and modes of operation before using the Weather Station.
Page 4
Technical Data - Cont. Technical Details: Indoor Unit • Six keys: MODE, +, - , HISTORY,CHANNEL,SNOOZE/LIGHT. • Time display in 12/24 format • Continuous perpetual calendar up to 2099 • Display of Date, Month and Day of week • Day of week display available in 7 languages, i.e. German, English, Italian, French, Dutch Spanish,Danish.
Page 5
Technical Data - Cont. • Indoor/outdoor temperature and humidity • Thermometer measuring range inside: 0°C to +50 °C , outside -20°C~60 °C • Temperature display elective in °C or °F • Temperature alert • Sun Rise Sun Set/moon rise moon set for 176 cities •...
Glossary 1. 12 hour history of pressure 16. Indoor humidity trend 2. Air pressure data 17. Week 3. Freeze 18. Day of Week 4. Weather 19. Alarm 5. Bar of air pressure 20. Month 6. Air pressure trend 21. Time 7.
Page 8
al Operation - Outdoor Sensor & Indoor Sensor Outdoor Sensor • Open the battery compartment located on the rear side of the device. Place the batteries in the battery compartment. Observe the shown polarity. • Please place in a sheltered position outside where it will not get wet or weathered. Indoor Unit •...
Programming - Manual Time S Manual time set-up (most important to quit the reception of radio controlled signal by holding the • Press and hold “MODE“ for 3 seconds. language.
Page 10
Programming - Manual Time Setup - Cont. Press “MODE“ Press • moonset. Information: • The clock automatically changes from set-up mode to time display mode if no keys are pressed for 20 seconds.
Programming - Daily Alarm Setup • Press “MODE” to switch from time display to A1 display. • Then press “MODE” to switch from A1 display to A2 display. (The setting is the same as for A1) • A1 is for Monday to Friday and A2 is for Saturday and Sunday. Daily alarm on/off •...
Programming - Snooze / 12-24Hr / ºC-ºF Snooze function - To activate the snooze function, follow the steps below • Press the key “SNOOZE/LIGHT“, while the alarm sounds, to activate the snooze function. • The alarm will repeat after 5 minutes. •...
Programming - Max/Min Indoor/Outdoor Temp Press + for displaying of indoor/outdoor max/min. of temperature and humidity Temperature alert set up. • Press “CHANNEL” to select the channel (ch1,ch2,ch3) if more than one outdoor sensorare within reach. • • Press “MODE” •...
Weather Forecasts 5 Weather Forecasts Sunny Slightly sunny Cloudy Rainy Stormy Note: As the weather is forecasted by temperature, humidity only, the display will have a discrepancy with the actual weather occasionally. Illumination Press the key “SNOOZE/LIGHT“ to activate the display illumination for 5 seconds.
Living Space Humidity & Battery The weather station uses saved data to determine the humidity in the living space and shows the respective symbols: below 40% Comfortable 40% - 70% (Temperature Display: 20 - 28°C) Humid 70% - 90% Comfortable Humid Low Battery Condition Display The weather station displays the low battery condition symbol to warn you that the...
Wireless Connection & Tips Wireless connection to the Outdoor Sensor • Press the key “CHANNEL” to select a channel. You can read the data of up to 3 sensors at one weather station. • Press and hold the key “CHANNEL” for 3 seconds to search for outdoor sensors. Tips When placing both the inside and outside units remember they are subject to interference.
Page 24
HOLMAN Industries: 47 Walters Drive, Scan the QR Code above Osborne Park, WA 6017. to see more information Ph: +61 8 9204 1011 on this product and the full iWeather product range. www.holmanindustries.com.au...
Need help?
Do you have a question about the iWeather and is the answer not in the manual?
Questions and answers