Iwatsu HV-P60A Instruction Manual page 8

High Voltage Probe HV-P60A
● Always use or storage this instrument only within the rated operating
range.
The use of this instruction out of the rated operating range could result in
malfunction. The temperature ranges that allow the use of this instrument
are as follows.
・The range of operating or storaged temperature
：-10 ℃ to ＋50 ℃ (no dew condensation)
● Do not use or store this instrument in a location with direct sunlight,
high temperature, high humidity, or dew condensation.
An internal temperature might go up, and it cause an electric shock, fire or
malfunction.
● Do not put this instrument in a place exposed to lamp soot or steam
generated by counters, humidifiers, etc.
It may cause fire or malfunction.
● For your safety, remove the oscilloscope and the target to be measured
from this instrument before maintenance. In addition, wipe off with a dry
cloth when water droplets are attached.
If not, an electric shock or malfunction may occur.
● Before transporting this instrument, pack the housed instrument in the
packing material used at the time of purchase, or the equivalent or
better.
This instrument may fail if a large vibration or impact is applied during
transportation, possibly causing an electric shock or fire. If you do not have
a proper packing or shock-absorbing material for transportation, contact
Iwatsu office or our sales distributors. If transportation is to be handled by a
forwarding agent, display "Contains a precision machine" on each side of
the packing box.
● We recommend that you contact Iwatsu office or our sales distributors
for periodic inspection and calibration about once a year.
The measuring instrument might grow by the secular distortion the error
margin of measurements, and not fill a prescribed performance.
(The check and the calibration are received for a fee.)
Read the following safety information
Cautions
vi