5) The earth lead of the attachment is connected with the
ground terminal of the object to be measured.
6) The lead wire is drawn out from the point to be measured, and
connected with Tip of Probe. (Refer to Figure 6.)
When connecting the lead wire, it is tightened firmly with Clamp
of the attachment.
Connector
Oscilloscope
Matching box
Figure 6 Connection of lead wire for measurement
Probe body
Ground terminal
High Voltage Probe HV-P60A
Tip
Lead wire for
measurement
Earth lead of the attachment
Ground lead
11
Clamp
Measurement part
Object to be
measured