Iwatsu HV-P60A Instruction Manual page 5

● Do not use in an environment with explosive gases.
It may cause an explosion.
● If you notice smoke, foul odor or abnormal noise, stop
measurement immediately.
Continued use under these circumstances may result in electric shock, fire
or malfunction. Immediatelly, turn off the power switch of the object to be
measured and remove this probe from the object to be measured after
confirming the thing that a high voltage has not gone out, and contact
Iwatsu office or our sales distributors for repair. The customer should never
repair the instrument because it is dangerous.
● This instrument is not a waterproof. Make sure no water gets
on or inside the instrument.
If the instrument is used in the wet condition, it may cause an electric
shock, fire or malfunction. If water is allowed in it, immediately turn off the
power switch of the object to be measured and remove this probe from the
object to be measured after confirming the thing that a high voltage has not
gone out, and contact Iwatsu office or our sales distributors for repair.
● Do not use this instrument when the drop of water adheres to
it or the hand is wet.
Otherwise electric shock, fire or malfunction could result.
● Do not place this instrument on an unstable place, such as a
shaky stand or an inclined place.
If this instrument is placed on an unstable place, it may be fallen down or
laid down, causing a personal injury or malfunction. It is recommended to
use a probe stand SK-301 (option). If this instrument is fallen down or
damaged, immediately turn off the power switch of the object to be
measured and remove this probe from the object to be measured after
confirming the thing that a high voltage has not gone out, and contact
Iwatsu office or our sales distributors for repair.
Read the following safety information
Warnings
[Read the next page.]
High Voltage Probe HV-P60A
iii