SPORTSTECH SX500 Manual page 30

Slide the handlebar post (pt.17) into
the handlebar post housing on the main
frame (pt.16). You will have to slacken
the knurled section of the L-shaped
knob (pt.26) and pull the knob back
and then select the desired height.
Release the knob and retighten the
knurled portion.Then fix the handlebar
(pt.18) with a flat washer 1 (20) and
L-shape knob (19)
.
ATTENTION: YOU SHOULD FIX THE
HANDLEBAR TIGHTLY
Fix the computer (pt.78) onto the
computer holder with bolts (pt.55)
and connect the plugs (A1&A2).
The pedals (pt.1 L & pt.1 R) are
marked „L" and „R" - Left and Right.
Connect them to their appropriate
crank arms. The right crank arm is on
the right- hand side of the cycle as you
sit on it. Note that the right pedal should
be threaded on clockwise and the left
pedal counter-clockwise.
Firmly tighten all component parts
and pre-assembled parts!
30