Network Connection - Sony BDP-S560 Operating Instructions Manual

Buttons
</M/m/,,
ENTER

Network Connection

Diagnostics
You can run the network diagnostic.
1
Select "Network Connection
Diagnostics" in "Network Settings,"
and press ENTER.
2
Select "Start," and press ENTER.
The network diagnostic starts.
Results are displayed after the player
finishes running the network diagnostic.
If an error message appears, follow the
on-screen instructions and perform
"Network Connection Diagnostics"
again.
3
Select "Finish," and press ENTER.
Connection Server Settings
1
Connect a DLNA certified device to the
network set in "Step 4: Connecting to
the Network" on page 24, and set up
the DLNA certified device as a home
server.
For details, refer to the instruction
manual supplied with the DLNA
certified device.
b
When a firewall is set for the DLNA certified
device, disable the function. For details, refer
to the instruction manual supplied with the
DLNA certified device.
2
Press HOME.
3
Select
58
Details
• Select an input function
using </M/m/,, and
press ENTER.
• Enter characters as
follows: Select a
1
character selection panel
using </M/m/,, and
press ENTER.
2
character using </,,
and press ENTER.
(Setup) using </,.
4
Select "Connection Server Settings"
in "Network Settings," and press
ENTER.
The connected server list appears.
Select a
If no server appears in the server list,
press OPTIONS to select "Update Server
List," and press ENTER.
5
Press OPTIONS to select "Network
Diagnostic," and press ENTER.
6
Select "Start," and press ENTER.
The network diagnostic starts.
Results are displayed after the player
finishes running the network diagnostic.
• To display detailed results for a server,
select a server using M/m, and press
ENTER. To go back to the results
display, select "Close," and press
ENTER.
7
Press RETURN to return to the server
list.
8
Press RETURN to exit.
To display/hide a server
1
While the connected server list is
displayed, select a server using M/m, and
press ENTER.
2
Select "Shown" or "Hidden" using M/m,
and press ENTER.
When you select "Hidden," the server
will not be displayed in the photo
category.
z
You can hide a server in the photo category as well.
Select the server using M/m, and press OPTIONS to
select "Hidden," then press ENTER.