Connecting To An Hdmi Jack - Sony BDP-S560 Operating Instructions Manual

Connecting to an HDMI jack

If your AV amplifier (receiver) has an HDMI input, use this connection. You can enjoy higher
quality sound from the connected AV amplifier (receiver).
To enjoy 7.1 channel sound, use a High Speed HDMI cable.
If you connect a Sony AV amplifier (receiver) that is compatible with the "Control for HDMI"
function (page 16), refer to the instruction manual supplied with the AV amplifier (receiver).
1
Connect the HDMI OUT jack of the
player and your AV amplifier
(receiver).
2
Set "BD Audio Setting" to "Direct" in
the "Audio Settings" setup (page 49).
To enjoy the secondary audio
(commentary), set "BD Audio Setting"
to "Mix."
20
HDMI cable (not supplied)
HDMI cable (not supplied)
Blu-ray Disc/DVD player
AV amplifier (receiver)
z
Check the following settings:
– "Audio Output Priority" is set to "HDMI" in the
"Audio Settings" setup (page 48).
– "Audio (HDMI)" is set to "Auto" in the "Audio
Settings" setup (page 48).
b
Not all HDMI-compatible AV amplifiers
(receivers) accept 8ch Linear PCM signals. Refer as
well to instruction manual supplied with the
connected AV amplifier (receiver).
TV