Step 2: Preparing For Network Connection; Step 3: Easy Setup - Sony BDP-S2200 Operating Instructions Manual

Step 2: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to "Step 3: Easy
Setup" (page 16).
Wireless Setup
Use the wireless LAN that is built into
the player.
LAN cable (not supplied)
Wireless LAN
router

Step 3: Easy Setup

When turned on for the first time
Wait for a short while before the
player turns on and starts [Easy
Initial Settings].
16
ADSL modem/ Internet
Cable modem
1
Insert two Size AAA (R03)
batteries (not supplied) by
matching the 3 and # ends on
the batteries to the markings
inside the battery compartment of
the remote.
2
Connect the supplied AC adaptor
in the numeric order shown
below. When removing them, do
so in reverse order.
1
to DC IN
12 V
AC adaptor (supplied)
3
Press [/1 to turn on the player.
4
Turn on the TV and set the input
selector on your TV. This will
show the signal from the player
on your TV screen.
to AC outlet
2