Step 3: Preparing For Network Connection - Sony BDP-S4100 Operating Instructions Manual

Step 3: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to "Step 4:
Configuración fácil" (page 16).
Configuración por cable
Use a LAN (local area network) cable to
connect to the LAN (100) (local area
network) terminal on the player.
LAN (local area network)
cable (not supplied)
*
Internet ADSL modem/
Cable modem
* ADSL (asymmetric digital subscriber line)
z
Using a shielded interface cable (LAN (local
area network) cable), straight or crossing, is
recommended.
Configuración USB
inalámbrica (BDP-S4100
only)
Turn off the player, then connect the
USB (universal serial bus) Wireless
LAN (local area network) Adapter
(UWA-BR100* (not supplied)) to the
USB (universal serial bus) jack on the
rear of the player.
* The USB (universal serial bus) Wireless
LAN (local area network) Adapter may not
be available in some regions/countries.
b
The receiving sensitivity changes depending
on the environment. Use the extension cable
supplied with the USB (universal serial bus)
Wireless LAN (local area network) Adapter if
necessary.
USB (universal serial bus) Wireless
LAN (local area network) Adapter
Wireless
LAN
router
*1
LAN (local area network)
Broadband
*2
ADSL (asymmetric digital subscriber line)
router
Configuración inalámbrica
(BDP-S5100 only)
Use the wireless LAN (local area
network) that is built into the player.
Wireless
LAN
router
*1
LAN (local area network)
*2
ADSL (asymmetric digital subscriber line)
LAN (local area network)
cable (not supplied)
*2
ADSL modem/
*1
Cable modem
LAN (local area
network) cable (not supplied)
*2
ADSL modem/
*1
Cable modem
Internet
Internet
15