Step 3: Preparing For Network Connection; Step 4: Easy Setup - Sony BDP-S1100 Operating Instructions Manual

Step 3: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to "Step 4: Easy
Setup" (page 13).
Wired Setup
Use a LAN cable to connect to the LAN
(100) terminal on the player.
LAN cable
(not supplied)
Internet ADSL modem/
Cable modem
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.

Step 4: Easy Setup

When turned on for the first time
Wait for a short while before the
player turns on and starts [Easy
Initial Settings].
1
Broadband
router
2
3
Insert two R6 (size AA) batteries
by matching the 3 and # ends on
the batteries to the markings
inside the battery compartment.
Plug the player into the mains.
to mains
Press [/1 to turn on the player.
13