Maintenance; Service And Transport - Sharp KA-72D19AM2-EU User Manual

inner frame do not require cleaning. Ho-
wever; depending on usage, replacing
them after a certain period of time is re-
commended.

MAINTENANCE

Replacing the Oven Light
The change of oven lamp must be done
by by an authorized technician. The ra-
ting of the bulb should be 230V, 25Watt,
Type E14,T300 before changing the
lamp, the oven should be switched off
and it should be cool.
The lamp design is specific for use in
household cooking appliances and it is
not suitable for household room illumi-
nation.
SERVICE AND
TRANSPORT
REQUIREMENTS BEFORE
CONTACTING SERVICE
If the oven does not operate:
The oven may have be switched off, or
disconnected On models fitted with a ti-
mer, the time may not be regulated.
If the oven does not heat:
the heat may be not adjusted with the
oven's heater control switch.
If the interior lighting lamp does not
light:
The electricity must be inspected. It
must be inspected to see whether the
lamps are defective. If they are defecti-
ve, you can change them following the
guide.
Cooking (if the lower-upper parts do not
cook equally):
Control the shelf locations, cooking pe-
riod and heat values according to the
manual.
Apart from these issues, if you are ex-
periencing any problems with your pro-
duct, please call to the Authorized Ser-
vice Centre.
INFORMATION RELATED TO
TRANSPORT
If you need any transport:
Keep the original product packaging
and use the original case for carrying.
Follow the transport instructions on the
case. Tape the cooker on upper parts,
hats and heads and saucepan carriers
to the cooking panels.
Place a paper between the upper cover
and cooking panel, cover the upper co-
ver, than tape to the side surfaces of the
oven.
Tape cardboard or paper onto the front
cover on interior glass of the oven as it
will be suitable to the trays, for the wire
grill and trays in your oven not dama-
ge to the oven's cover during transport.
Also tape the oven's covers to the side
walls.
If you do not have the original case :
Take appropriate measures to secure
the external surfaces (glass and pain-
ted surfaces) and of the oven to protect
it against possible blows.
EN