Sharp KA-72D19AM2-EU User Manual page 23

Use of digital timer
Time Adjustment:
The time must be adjusted before
starting to use the oven. Following the
power supply to the oven, symbol (A)
and the three "0"s on the screen will
begin to flash. Press the (+) and (-)
keys simultaneously. The symbol will
appear on the screen. Also, the dot in
the middle of the screen will begin to
flash. Using the (+) and (-) buttons,
adjust the current time while this dot is
flashing. After the adjustment, the dot
should be lit continuously.
Following the power supply to the
oven, when symbol (A) and the three
"0"s on the screen begin to flash, the
oven can not be operated using the
control buttons. When the (+) and (-)
buttons are pressed simultaneously
for time adjustment, the symbol will
appear on the screen. When this
symbol appears on the screen, you
can manually operate the oven. As the
adjusted time will be reset in the event
of a power failure, the time adjustment
operation will have to be carried out
once again.
Audible Warning Time
Adjustment:
The time must be adjusted before
starting to use the oven. Following the
power supply to the oven, symbol (A)
and the three "0"s on the screen will
begin to flash. Press the (+) and (-)
keys simultaneously.
The symbol will appear on the
screen. Also, the dot in the middle of
the screen will begin to flash. Using
the (+) and (-) keys, adjust the current
time while this dot is flashing. After
the adjustment, the dot should be
lit continuously. This function can be
used to receive audible warnings at the
completion of the adjusted time period.
Press the MODE key in the middle.
The symbol will flash on the screen.
Three "0"s will also appear. Adjust the
desired time period for the warning
by using (+) and (-) keys while the
symbol is flashing. Some time after
the completion of the adjustment,
the symbol will be lit continuously.
When the symbol begins to light
continuously, the audible warning time
adjustment is done.