Table of Contents
Advertisement
5. Operation
5.1 Confirming operation
(1) Turn the sewing machine power switch ON.
(2) Confirm that the work clamp lower when the foot switch (2-pedal) [Black] side is turned ON, and rise
when the switch is turned ON again.
(3) Lower the work clamp, and press
(4) Next, check that the positional relation of the clamp and needle hole center is at the scale shown in
the drawing. If the positions are deviated, refer to the PLK-G1010 Sewing Machine Head version
instruction manual and adjust the home.
5.2 Stitching test
(1) Select the stitching pattern. (Refer to the PLK-G1010 Sewing Machine Head version instruction
manual.)
(2) Press the [Black] side on the 2-pedal foot switch, and lower the work clamp. Next, press the [Gray]
side on the foot switch to rotate the sewing machine and start stitching. (Stitching will not start
unless the work clamp is lowered.)
(3) When stitching is completed, the sewing machine will automatically return to home, and the clamp
will rise.
on the operation panel. Return to home will start.
- 9 -
Advertisement
Table of Contents
