Mitsubishi Electric MP-G10-AO Technical Manual page 10

Ndustrial sewing machine

Table of Contents

(4) Enter a password

Please ask the dealer about a password.

(5) Press the inside of the frame under the

(A display in the frame is OF1 in a standard setting. If it is the other display, change to OF1.)

* Refer to the clause Output confirmation (Custom output) [of 2.Explanation of input/output

setting mode of [14]Input/output setting mode] of the technical manual "Operation Panel" for the

change method to OF1.

DETAILED

SETTING

(6) Press the

(7) Press the

(8) Press the

2ms ON, 4ms OFF, 33% Duty

And make display

(9)Press the

(10)Press the

two times.

(11)Press the

and return to standard screen.

The settings will be changed to the table shown below by the above operation.

Mode

Function name

Pneumatic type clamp

Factory setting

Remark s

For details, refer to the clause [14]Input/output setting mode of the technical manual "Operation

Panel".

4ms ON, 2ms OFF, 66% Duty

Set this when chan ging from the magnetic

clamp to the pneumatic clamp.

[chopping du ty settin g of details screen (2)]

several times.

Input/ou tput se tting

4mS=ON 2mS=OFF 66%

2mS=ON 4mS=OFF 33%

- 8 -

Table of Contents