Specifications - Mitsubishi Electric MP-G10-AO Technical Manual

1. Features
The pneumatic type clamp is used to increase or decrease the force applied on the material to be
stitched, and to adjust the pressing speed. This clamp is effective if the material to be stitched is heavy
and the magnetic type clamp is too weak to hold the material, or if the material is soft and needs to be
gently pressed.

2. Specifications

Name
Applicable model:
Sewing area
Clamp UP position
Pressing operation
Drive source air
pressure
CAUTION
Trouble such as operation errors could occur if the secondary pressure is set too high.
Use within the range of 0.4 MPa (4 kg/cm
： MP-G10-AO (pneumatic type clamp)
： PLK-G1010
： 100 (X) mm X 100 (Y) mm (same as PLK-1010）
： 30 mm
： Use foot switch (2-pedal) normally provided with the
： 0.5 MPa（5 kg/cm
Primary side
： 0.4 MPa（4 kg/cm
Secondary side:
2
).
electronic sewing machine.
2
）or more
2
）
- 1 -