Kenwood TK-2212 Service Manual page 8

Key operation
Key
[Selector] The selected item changes
[Side1] No action
[Side2] No action
[S] Enter the Item Setting mode
[A] Return to the Channel Selection mode
[<B] Error tone sounds
[C>] Error tone sounds
5-5. Item Setting Mode
In this mode, the selected item in the Item Selection mode
can be programmed.
When the [S] key is pressed in the Item Selection mode,
the transceiver enters the Item Setting mode.
The setup items for item setting mode are as follows.
Setup item Display
1. RX FREQ →
1.RX frequency
∗ ∗ ∗ . ∗ ∗ ∗ ∗ ∗
2. RX SIG →
2.RX signaling
TONE OFF/
QT ∗ ∗ ∗ .∗/
DQT∗ ∗ ∗ N/
DQT∗ ∗ ∗ I
3. TX FREQ →
3.TX frequency
∗ ∗ ∗ . ∗ ∗ ∗ ∗ ∗
4. TX SIG →
4.TX signaling
TONE OFF/
QT ∗ ∗ ∗ .∗/
DQT∗ ∗ ∗ N/
DQT∗ ∗ ∗ I
5. BAND ∗
5. Wide / Narrow
6.RF power Hi / Low 6. PWR ∗∗∗
7. SCN ∗∗∗
7.Scan Del / Add
8. SFT ∗∗∗
8.Beat shift on / off
9.Compander on / off 9. CMP ∗∗∗
Key operation
Key
[Selector] Changing the selection item (RX/ TX frequency and
RX/ TX signaling only)
[Side1] No action
[Side2] No action
[S] • Store the current settings and return to the Item
Selection mode.
• A MHz digit of the frequency blinks.
(RX/ TX frequency only)
• The icon of the current signaling configuration blinks.
(RX/ TX signaling only)
[A] Abort the current settings and return to the Item
Selection mode without backup.
[<B] Toggle/ Decrease the blinking value.
[C>] Toggle/ Increase the blinking value.
REALIGNMENT
Key Function
Remarks
Receive frequency
100.00000~280.00000MHz
Receive QT/DQT
Transmit frequency
100.00000~280.00000MHz
Transmit QT/DQT
W / N
HI / LOW
DEL / ADD
ON / OFF
ON / OFF
Key Function
TK-2212/2217
5-6. Self Programming Mode flow chart
■ Channel selection mode flow chart
[S]+Power ON
Data password SLF.LOCK.R
SLF.LOCK.W
Read authorization password /
Overwrite password entry (6 digits)
[S]
Self programming mode
Channel selection mode Zone selection
[<B] : Zone/Channel number decrement
[A] [S]
[C>] : Zone/Channel number increment
Item selection mode
[A] [S]
Item setting mode
[S]
■ Item selection mode flow chart
Channel selection mode
[S]
1. RX frequency
[A]
[Selector]
2. RX signaling
[A]
[Selector]
3. TX frequency
[A]
[Selector]
4. TX signaling
[A]
[Selector]
5. Wide / Narrow
[A]
[Selector]
6. RF power Hi / Low
[A]
[Selector]
7. Scan Del / Add
[A]
[Selector]
8. Beat shift on / off
[A]
[Selector]
9. Compander on / off
[A]
[Selector]
Item setting mode
Display
When the Read
authorization password is
set to the transceiver.
or
When the Overwrite
authorization password is
set to the transceiver.
SELF I I
Zone Channel
[Selector]
Channel selection
[S]
[S]
[S]
[S]
[S]
[S]
[S]
[S]
[S]
7