Advertisement
Getting started: Using the T68 as a modem
7.On the Port settings tab, enter the following settings:
• Data Bits: 8
• Parity: None
• Stop Bits: 1
• Flow Control: Hardware
• Terminal: leave check boxes cleared
8.On the TCP/IP tab, enter the following settings:
• Use server-assigned IP address: Select
• Use Slip: Leave cleared
• Use software compression: Leave cleared
• Use IP header compression: Leave cleared
9.On the Name Servers tab, enter the following settings:
• Use server-assigned addresses: Select, if your ISP does not ask you to enter the server
address manually.
10.Save the configuration by tapping OK and then tap Next.
11.In the Phone number box, enter *99***1# . The number before the hash mark should be the
same as the CID for the phone's data account.
• To check CID in the phone, scroll to: Connect / Data comm. / Data accounts . Open the account
you use for GPRS and check what CID is used for that account. If, for example, the CID is 3,
the dial string above should be *99***3# . Tap Next.
19
Advertisement
