ARB 2237010 Fitting Instructions Manual

Part Number: 2237010-2237020-2237030
Product
Description: Modular Bar
Suited to DODGE RAM 2500/3500
vehicle/s:
REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG;
When installed in accordance with these instructions, the front protection bar does not affect operation
of the SRS airbag.
ALSO, NOTE THE FOLLOWING:
 This product must be installed exactly as per these instructions using only the hardware
supplied.
 In the event of damage to any bull bar component, contact your nearest authorised ARB
stockist. Repairs or modifications to the impact absorption system must not be attempted.
 Do not use this product for any vehicle make or model, other than those specified by ARB.
 Do not remove labels from this bull bar.
 This product or its fixing must not be modified in any way.
 The installation of this product may require the use of specialized tools and/or techniques
 It is recommended that this product is only installed by trained personnel
 These instructions are correct as at the publication date. ARB Corporation Ltd. cannot be held
responsible for the impact of any changes subsequently made by the vehicle manufacturer
 During installation, it is the duty of the installer to check correct operation/clearances of all
components
 Work safely at all times

Unless otherwise instructed, tighten fasteners to specified torque
ARB 4x4 ACCESSORIES
42-44 Garden St
Kilsyth, Victoria
AUSTRALIA 3137
Australian enquiries
North & South American enquiries
Other international enquiries
20/08/2014
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
2012 on
WARNING
Corporate Head Office
Tel:
Fax:
www.arb.com.au
Page 1 of 15
+61 (3) 9761 6622
+61 (3) 9761 6807
sales@arb.com.au
sales@arbusa.com
exports@arb.com.au
Fitting instructions# 3789248