Raster Display - Bosch MTS 5200 LAB SCOPE Manual

BOSCH MTS 5200 LAB SCOPE
Presented by Bob Pattengale
Raster Display mode allows you to view the waveform of each cylinder in the firing order on a
single screen, simultaneously. Selecting a cylinder from the Cylinder Selection buttons at the
bottom of the touch screen display causes the MTS 5200 to hide or display the selected cylinder.
You may choose to display any number of cylinders on the display, but the MTS 5200 always
takes into account the number of cylinders in the firing order and spaces the patterns so that all
cylinders are displayed on a single screen. You may change the spacing between the cylinder
waveforms using the Pattern Spacing touch screen button in the Setup menu. Pattern Spacing
affects all cylinders in the firing order and is not specific to your selected cylinders.
14
1-800-71-TRAIN (1-800-718-7246) OR www.auto-video.com
NAVIGATING THE MTS 5200 (CONTINUED)
Primary & Secondary Ignition

Raster Display

NOTES