Code 3 XCEL Series Installation And Operation Instructions Manual page 3

Programing:
Latching Auxiliary Buttons to 3 Level Switch - By moving the 3 level switch to any level, you can then press any of the
auxilary buttons to add to that Level of the 3 Level Switch. Example, Moving the 3 Level Switch to Level 1, then pressing the
Auxiliary Button A (A will illuminate RED) will add Aux A output to Level 1. After selections are made in any level, move the 3
Level Switch to next desired location and repeat process. When all levels are programmed to the desired settings, move the 3
Level Switch back to Level 0 and press the Manual Button to move to the next step.
Auxiliary Button Type (ON/OFF, Momentary, Timed) - By pressing any of the Auxiliary Buttons, the backlighting should
either be solid ON RED or Flashing RED. If the button is solid ON RED, that means the button is in the ON/OFF setting, if the
button is Flashing RED, that means this button is momentary (or timed 8 Seconds for Auxilary Button F). Once all Auxiliary But-
tons are programmed to the desired setting, press the Manual Button to move to the next step.
Park Kill, Horn Ring In, Light Alert, Button Press Buzzer - Auxiliary Button A programs the Park Kill feature, if the button is
solid ON RED, the Park Kill is a +12V signal, if the button is flashing RED, the Park Kill input will be a Ground signal. Auxiliary
Button B programs the Horn Ring In feature, if the button is solid ON RED, the Horn Ring In is a +12V signal, if the button is
flashing RED, the Horn Ring In is a Ground signal. Auxiliary C programs the Light Alert feature, if the button is solid ON RED,
the internal buzzer will beep every 8 seconds if any lighting switch is ON, if the button is flashing RED, Light Alert is disabled.
Auxiliary Button D programs the Button Press Buzzer, if the button is solid ON RED, anytime a button is pressed, the buzzer
will beep, if the button is flashing RED, this feature will be disabled. Once all the features have been programmed to the de-
sired setting, press the Manual button to exit programming.
To change the backlighting intensity, Please follow the following instructions:
1. Move Level Switch to Level 0 (furthest to the left)
2. Turn all Auxiliary Switches off
3. Move Rotary Knob to RAD (Radio)
4. Press and hold MAN (Manual) button for at least 2 seconds (at this point the Auxiliary Button backlighting indication will
turn RED) , then release.
5. Immediately press, in order, Auxiliary Buttons F - D - C - A
6. If entered correctly, the Air Horn button will be flashing and you can now adust the backlighting intensity.
Adjustable Backlighting - The Backlighting can be adjusted as desired. Pressing the Air Horn button will change the back-
lighting brightness. There are 4 steps; Off, 30%, 70% 100% brightness. When finished making adjustments, press the Manual
Button.
Page 3 of 12