Adjusting The Volume; Temporary Level Adjustments - B&K Reference 50 Owner's Manual

ADJUSTING THE VOLUME

Z1 Master Volume
From Remote
VOLUME + or VOLUME −
MUTE
Note: The front panel VOLUME KNOB is used to control multiple functions and, therefore, cannot always control
the volume. The VOLUME KNOB may control volume in the menu system when not used for parameter
adjustments. During normal operation the VOLUME KNOB may switch to controlling other functions but will return
to MASTER LEVEL after a few seconds. The remote's VOLUME + or VOLUME − will always change master
volume level except in the SETUP SPEAKER LEVELS and SETUP 'Source' INPUT menus.

TEMPORARY LEVEL ADJUSTMENTS

Occasionally you may find that you can't hear the dialog very well in a particular movie, or a movie has too much
bass, etc. You can temporarily adjust the center, surround, and subwoofer settings without changing the
permanent settings you made under the SETUP SPEAKER LEVELS menu.
Z1 Center Volume 0.0 dB
From 7.1 Style Remote
CENTER + or CENTER –
REAR + or REAR –
SUB + or SUB –
Note: these settings are temporary and will be lost when you put your receiver to sleep or turn off the main power.
If you have particular temporary setting that you use often, you may save them in a preset.
From SR10.1 Style Remote
1 MAIN
2 B&K
3 PAGE
4 PAGE
5 PAGE
6
CNTR + or CNTR –
REAR + or REAR –
SUB + or SUB –
7 MAIN
* We recommend viewing the SR10.1 Owner's Manual for further Information and usage.
0.0 dB
From Front Panel
VOLUME KNOB
can't do from front panel
From Front Panel
see Zone 1 operation
see Zone 1 operation
see Zone 1 operation
Action
make sure remote is in MAIN mode
select to view PAGE 1
select to view PAGE 2
select to view PAGE 3
select to view PAGE 4
adjust center volume
adjust surround volume
adjust subwoofer volume
return to MAIN mode
47
Z1 VOLUME 0.0
Action
adjust volume
instant volume all the way down
press MUTE again to restore
Z1 CENTER 0.0
Action
adjust center volume
adjust surround volume
adjust subwoofer volume