Adjusting The Volume; Temporary Level Adjustments - B&K Reference 20 Plus Owner's Manual

ADJUSTING THE VOLUME

Z1 Master Volume
From Remote
VOLUME or VOLUME
MUTE
Note: The front panel VOLUME KNOB is used to control multiple functions and, therefore, cannot always control
the volume. The VOLUME KNOB may control volume in the menu system when not used for parameter
adjustments. During normal operation the VOLUME KNOB may switch to controlling other functions but will return
to MASTER LEVEL after a few seconds. The remote's VOLUME
volume level except in the SETUP SPEAKER LEVELS and SETUP 'Source' INPUT menus.

TEMPORARY LEVEL ADJUSTMENTS

Occasionally you may find that a you can't hear the dialog very well in a particular movie, or a movie has too
much bass, etc. You can temporarily adjust the center, surround, and subwoofer settings without changing the
permanent settings you made in the under SETUP SPEAKER LEVELS menu.
Z1 Center Volume 0.0 dB
From Remote
­
CENTER or CENTER
­ V
REAR or REAR
­ V
SUB or SUB
Note: these settings are temporary and will be lost when you put your processor to sleep or turn off the main
power. If you have particular temporary setting that you use often, you may save them in a preset.
0.0 dB
From Front Panel
VOLUME KNOB
can't do from front panel
From Front Panel
V
see Zone 1 (A) operation
see Zone 1 (A) operation
see Zone 1 (A) operation
= 92/80(
Action
adjust volume
instant volume all the way down
press MUTE again to restore
or VOLUME
= &(17(5
Action
adjust center volume
adjust surround volume
adjust subwoofer volume
48

will always change master

13258 11/01