B&K Reference 50 Owner's Manual page 40

From Remote
1 À(UP) or §(DOWN)
¶ •
2
(LEFT) or (RIGHT)
Set the Zone 1 Monitor Aspect Ratio - During normal operation, your processor will overlay status information
on your video monitor. This information is normally displayed at the bottom of the monitor. However, if you are
viewing letterbox material on a 16:9 (widescreen) monitor, this information will be cut off. Selecting the 16:9
monitor aspect ratio will position the status display within the letterbox viewing area. This setting does NOT affect
setup menus. Your monitor must be set for normal 4:3 viewing in order to display the entire menu page.
From Remote
1 À(UP) or §(DOWN)
¶ •
2
(LEFT) or (RIGHT)
3 MENU
SETUP DISPLAYS
1 Front Panel Bright
2 Overlay Opaque Bright
3 Backround Color Blue
4 Z1 Monitor Video Manual
4 Z1 Monitor Video Manual
5 Z1 Monitor Aspect 4 : 3
next item adjust
MENU setup system
VIDEO MANUAL
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
SETUP DISPLAYS
1 Front Panel Bright
2 Overlay Opaque Bright
3 Backround Color Blue
4 Z1 Monitor Video Manual
5 Z1 Monitor Aspect 4 : 3
5 Z1 Monitor Aspect 4 : 3
next item adjust
MENU setup system
ASPECT 4:3
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
MENU
36
Action
move to Zone 1 Video Monitor
adjust for desired operation
Action
move to Zone 1 Monitor Aspect
change aspect ratio
return to SETUP SYSTEM