Inputs - B&K Reference 50 Owner's Manual

Inputs

Usually these settings may be left set to the factory defaults. However, your processor allows 'fine tuning' of how
the surround processor operates after the selection of an input source. Make sure you are in the SETUP MENUS
and your remote is in B&K mode.
MAIN MENU
1 Zone 1 Operation
2 Zone 2 Operation
3 Zone 1 Favorite Presets
4 Zone 2 Favorite Presets
5 System Setup
5 System Setup
6 Memory Backup/Restore
next item
MENU
SYSTEM SETUP
From Remote
1 À(UP) or §(DOWN)
2 SEL or ENTER
Select input -
From Remote
¶ •
1
(LEFT) or (RIGHT)
Set the favorite audio listening mode - Your processor provides for 5 audio listening modes Mono, Stereo,
Surround, THX and DVD Audio (See AUDIO MODES). You may set a default audio mode and speaker selection
(excluding selection 0 'Headphone', or selection 9 'LtRt') for each of your input sources. When a source is
selected from the remote control or front panel, the audio mode will automatically be set to use this favorite mode
and speaker selection. Note that DVDA mode can only be selected if that input is designated as the DVD audio
input below.
SEL select
exit menu system
From Front Panel
(UP) or (DOWN)
(ENTER)
SETUP DVD INPUT
SETUP DVD
1 Favorite Mode
2 Favorite Speakers
3 2-chan decoder
4 Multi-chan type
5 Level
6 Name
7 Component Video
8 DVD Audio Input
next item
MENU system setup
SETUP
From Front Panel
VOLUME KNOB
SETUP SYSTEM
1 Speakers
2 Displays
3 Inputs
3 Inputs
4 Presets
5 Music Modes
6 Advanced
next item SEL select
MENU main menu
SETUP INPUTS
Action
move to Inputs
activate SETUP INPUTS
INPUT
Surround
Back 4
DPLII Movie
Surr Movie
+5.5 dB
5char
3
Yes
adjust
DVD
Action
select source
37