B&K Reference 50 Owner's Manual page 39

Set the intensity of on-screen video overlays - Overlays will appear when you change a processor setting or
your processor detects a change in the incoming audio or video information. Transparent mode allows video to be
seen behind the overlay.
From Remote
1 À(UP) or §(DOWN)
2 ¶ •
(LEFT) or (RIGHT)
Set the background color for your on-screen display menus -
From Remote
1 À(UP) or §(DOWN)
2 ¶ •
(LEFT) or (RIGHT)
Set your Zone 1 monitor video operation - More than likely you have a composite or S-VIDEO monitor, which
will be used to view your selected source's video. Your processor has the capability to process BOTH composite
video and S-VIDEO simultaneously. Your processor DOES NOT convert between composite video and S-VIDEO.
In MANUAL mode your processor will always send both composite video and S-VIDEO to your Zone 1 monitor.
When your processor first detects video on a selected source it checks to see if it is composite or S-VIDEO or
both. It then shows a message which displays the current status as to the incoming video 'Composite', 'S-VIDEO'
or 'Both Video', to both video outputs. When no video is available on one of the video formats (composite or S-
VIDEO), it will send its internal background screen to the monitor and then prompt you if there is video available
using the other video format.
In AUTO mode, your processor will look for S-VIDEO on the selected source. If it finds S-VIDEO it will send it to
your Zone 1 monitor. Your processor will also look for composite video on the selected source. If it finds
composite video it will send it to your Zone 1 monitor. If it finds no S-VIDEO on the selected source it will send no
video. Similarly if it finds no composite video on the selected source it will send no video. This allows for the use
of your Monitor's auto video detection circuit (if available) to select the proper video format for your viewing.
SETUP DISPLAYS
1 Front Panel Bright
2 Overlay Opaque Bright
2 Overlay Opaque Bright
3 Backround Color Blue
4 Z1 Monitor Video Manual
5 Z1 Monitor Aspect 4 : 3
next item adjust
MENU setup system
OVERLAY OP BRIGHT
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
SETUP DISPLAYS
1 Front Panel Bright
2 Overlay Opaque Bright
3 Backround Color 3 Backround Color Blue Grey
4 Z1 Monitor Video Manual
5 Z1 Monitor Aspect 4 : 3
next item adjust
MENU setup system
DISPLAY GREY
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
35
Action
move to Overlay
change overlay type
Action
move to Background Color
change background color