Advanced Features; Advanced; Zone 1 (A) Setup - B&K Reference 50 Owner's Manual

A/v system controller

Hide thumbs

Table Of Contents

Table of Contents

WARNING -

The following describes the advanced features of the processor. Since changing some of

these functions may cause severe effects such as no sound or no remote control operation, we suggest you leave

this menu disabled (hidden) for normal operation. If you are unsure of what you are changing

any advanced operations. These features may be activated by simultaneously pressing the SLEEP, DOWN, and

UP buttons on the front panel of the processor.

ADVANCED

Usually these settings may be left set to the factory defaults. However, these settings allow additional

modifications to the operation of your processor. Make sure you are in the SETUP SYSTEM MENU and your

remote is in B&K mode.

MAIN MENU

1 Zone 1 Operation

2 Zone 2 Operation

3 Zone 1 Favorite Presets

4 Zone 2 Favorite Presets

5 System Setup

6 Memory Backup/Restore

next item

SYSTEM SETUP

From Remote

À(UP) or §(DOWN)

SEL or ENTER

Zone 1 (A) Setup

Zone A has been factory default set to use a Zone ID setting of 1. Zone 1 (A) configuration will allow you to set

maximum volume level, remote control 'Zone' ID, OSD enable, V1 tape mode and the surround operation. Make

sure you are in the ADVANCED SYSTEM SETUP menu and the remote is in B&K mode.

ADVANCED SYSTEM SETUP

1 Zone 1 Setup 'A'

2 Zone 2 Setup 'B'

3 Power On Titles

4 Control Out

5 Security Options

6 DSP Usage

7 RS-232 Control Port

next item

MENU setup system

Z1 SETUP "A"

From Remote

À(UP) or §(DOWN)

SEL or ENTER