EuroLite AKKU KLS-180 User Manual page 32

Strobe LEDs
In Stro mode, you can set the strobe function of the white strobe LEDs in Auto and Sound mode.
1. Press the MENU button so many times until Stro is indicated in the display. Confirm with the ENTER
button.
2. Use the buttons UP and DOWN to choose on (strobe function on) or oFF (strobe function off). Confirm
with the ENTER button.
Interconnecting several devices (master/slave operation)
Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller. The devices must be set to the corresponding
operating modes.
1 Configure all slave units before connecting the master unit: Press the MENU button so many times until
SLAU is indicated on the display. Confirm with the ENTER button.
2 Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
3 Set the master unit to the desired operating mode. The interconnected devices will now operate
synchronously.
Energy-saving mode
This mode offers the possibility of individually setting the operating time when in battery mode.
For example:
Maximum operating time in battery mode with one color: 20 hours
Maximum operating time in battery mode fully on: 4 hours
1. Press the MENU button so many times until ECO is indicated in the display. Confirm with the ENTER
button.
2. Use the buttons UP and DOWN to choose on (energy saving function on) or oFF (energy saving function
off). Confirm with the ENTER button.
32/40 00127887, Version 1.0