Table of Contents
Advertisement
11. Click Next.
12. If the Digital Signature Not Found window appears, click Yes.
13. Click Finish. You should be back in the Modems tab of the Phone and Modem Options folder.
14. Click OK.
Installing Operations Console connection modem for Windows XP:
For a local console to communicate with the system, you must install the Operations Console connection
modem that is included with Operations Console. Use these instructions only if you are configuring a
local console that is directly attached to the system or a local console that is directly attached with remote
access allowed.
To install, follow these steps:
1. Click Start → Settings → Control Panel.
2. Double-click Phone and Modem Options and click on the Modem tab to display the Install New
Modem panel. If you have other modems installed, the Modems Properties panel will display, and
you need to click Add.
3. Select Don't detect my modem; I will select it from a list.
4. Click Next.
5. Click Have Disk...
Note: If you know the full path to the Operations Console Connection driver (cwbopaoc.inf), enter it
here. Then, go to step 7. If you do not know the path, continue with step 6.
6. Click Browse...
Navigate to drive:\path\Client Access\Aoc\Inf\ cwbopaoc.inf where drive: is the drive where iSeries
Access for Windows is installed.
Note: The default install path is: C:\Program Files\Ibm\Client Access\Aoc\Inf\cwbopaoc.inf
7. Click Open, then click OK.
8. Click Next.
9. Select the communications port where the Operations Console cable is attached, and click Next.
10. If prompted, select Continue Anyway to continue the installation.
11. Click Finish and then click OK.
Installing PC modem
Your PC requires a PC modem.
Installing PC modem for Windows 2000:
To install the PC modem on your system running Windows 2000, follow these steps.
If you are installing a PC modem that requires specific drivers, use the instructions that the modem
manufacturer provides. Otherwise, follow these instructions:
1. Click Start → Settings → Control Panel → Phone and Modem Options.
2. If you are currently in the Modems tab of the Phone and Modem Options folder, click Add and then
click Next. Otherwise, if you are at the Install New Modem window, click Next. The PC should find
the new modem and report its location.
3. When the window shows the modem it found, click Next to accept it. The PC will now load the
driver code to support it.
4. Click Finish to return you to the Phone and Modem Options folder.
5. Close the Phone and Modem Options folder.
36
System i: Connecting to System i Operations Console
Advertisement
Table of Contents
Troubleshooting
