AT&T PARTNER Plus Programming Quick Reference Manual page 5

DIAL MODE
P+ > R1.0
PII > R1.0
DIAL #201
DIAL a line number (01–12 P+,01–
24 PII)
DIAL 1 = Touch-Tone
2 = Rotary
PRESS [
Next Item
line
HOLD DISCONNECT TIME
P+ > R1.0
PII > R1.0
DIAL #203
DIAL a line number (01–24)
DIAL 1 = Long (450 msec)
2 = Short (50 msec)
PRESS [
Next Item
line
AUTOMATlC SYSTEM ANSWER
LINES
PII > R3.0
DIAL #204
DIAL a line number (01–24)
DIAL 1 = Assigned
2 = Not Assigned
PRESS [
Next Item
line
DIRECT EXTENSION DIAL LINES
PII > R3.0
DIAL #205
DIAL a line number (01–24)
DIAL 1 = Assigned
2 = Not Assigned
PRESS [
Next Item
line
Procedures #207, #313, #314 and #315—shown in
square dotted boxes—are not available when the system
is configured for Key mode.
IMPORTANT:
In Key mode, the Number of Lines procedure changes Line Assignment (#301), Line Access Restriction
(#302), Automatic Line Selection, and Line Ringing to factory settings. To change line assignments without affecting other
settings, use Line Assignment (#301).
In Hybrid mode, the Number of Lines procedure changes Pool Line Assignment (#207), Pool Extension Assignment (#314),
and Pool Access Restriction (#315) for existing pools back to factory settings. Additionally, it changes Line Assignment (#301),
Line Access Restriction (#302), Automatic Line Selection, and Line Ringing for individual lines back to factory settings. To
change pool assignments without affecting other settings, use Pool Line Assignment (#207) and Pool Extension Assignment
(#314).
Lines
(p. 5-36)
(p. 5-58)
] to program another
(p. 5-74)
(p. 5-106)
] to program another
(p. 5-25)
] to program another
(p. 5-63)
] to program another
#106 PBX Dial Out Code
#721 PBX/Centrex Mode
#722 Reset - Line Assignments
#723 Button Down Mode
GROUP CALL DISTRIBUTION
P+ > R3.1
(p. 5-62)
PII > R3.0
(p. 5-94)
DIAL
#206
DIAL a group number (1–6, 7 for
VMS)
DIAL a line number (01-12P+, 01–
24 PII)
DIAL 1 = Assigned
2 = Not Assigned
3 = VMS Line Cover (only for
hunt group 7)
PRESS [ ] to program another
Next Item
line
POOL LINE ASSIGNMENT
PII > R4.0 (p. 5-157)
DIAL #207
DIAL a line number (01–24)
DIAL 1 = No Pool
2 = Main Pool 880
3 = Pool 881
4 = Pool 882
5 = Pool 883
PRESS [ ] to program
Next Item
another line
LINE COVERAGE EXTENSION
P+ > R4.0
(p. 5-88)
PII > R4.0
(p. 5-122)
DIAL #208
DIAL a line number (01–12 P+,01–
24 PII)
DIAL an extension number (10–33
P+, 10–57 PII)
PRESS [ ] to program another
Next Item
line
PRESS [ ] to unassign
Remove
ownership
OLDER VERSION CODES
, 0-9 [
, 1 = Active, 2 = Not Active
, 1 = Active, 2 = Not Active
= 9]
P+/PII R4.1
5