Before You Play; Placing The Fp-30X On A Stand; Connecting Equipment (Phones Jacks); Attaching The Music Rest - Roland FP-30X Owner's Manual

Before You Play

Placing the FP-30X on a Stand

If you want to place the FP-30X on a stand, use the Roland KSC-70 (refer to the KSC-70 Owner's Manual), KS-12, KS-20X or KS-10Z.
* Be careful not to pinch your fingers when setting up the stand.
KS-12
Adjust the height of the stand to the lowest position.
Adjust the width of the stand so
that the rubber feet on the front of
the piano fit into the corresponding
openings of the stand
KS-10Z

Connecting Equipment (Phones Jacks)

Phones 1/2 jacks
You can connect stereo headphones
here. Since the FP-30X has two
headphone jacks, two people can use
headphones at the same time.
4
Keyboard side
Top view
Align the front of the
Piano with the front of
the stand
NOTE
For safety, do not use the stand
in its very highest adjustment
position.
* The headphone jack on the left
accommodates a stereo mini-
plug, and the jack on the right
accommodates a stereo 1/4" plug.
Use the jack that fits the plug of
your headphones.
Headphones
KS-20X
Align the center of the Piano with the center of the stand.
Align the front
of the Piano
with the front of
the stand
Adjust the stand so that its width is not less than 700 mm (27-9/16 inch).
Adjust the horizontal width

Attaching the Music Rest

1
Insert the music rest into the slit on the top of the
piano.
1
Place the Piano so that its rubber feet
on the front of the piano are on the
inner side of the stand
Keyboard side
Top view
1