Levita AC 12000 Maintenance And User Manual page 11

1.2 Installation of the window sealing plate assembly parts
1) Partly open the window and fit the window sealing plate assembly into the window (see
Fig. 2 and Fig. 3). The plate parts can be placed both in horizontal and vertical positions.
2) Spread the parts of the window sealing plate assembly and adjust the hole distance so
that both ends of the plate assembly are in contact with the window frame and attach
the assembly parts to the window.
Notes:
1) The flat end of the outlet pipe must snap into the opening.
2) The outlet piping must not be deformed or bent to a sharp angle (more than 45°). Keep
the outlet piping clear.
1.3 Air-conditioning unit installation
1) Place the air conditioning unit with the hot air outlet piping and the accessories in front
of the window, whereas the distance of the air conditioning unit body from the walls
and other objects must be at least 50 cm (see Fig. 4).
2) Extend the outlet piping and attach the flat end of the piping to the opening in the
window sealing plate assembly (see Fig. 5 and Fig. 6).
Notes:
a/ The flat end of the outlet pipe must snap into the opening.
b/ The outlet piping must not be deformed or bent to a sharp angle (more than 45°). Keep
the outlet piping clear.
Fig. 2
Fig. 3
Fig. 4
11