Assembling The Frozen Treat Maker - Emeril Lagasse Pasta & Beyond PM-01 Owner's Manual

Parts & Accessories
Assembling the Frozen Treat Housing
1. Attach the Slow Juicer Housing (U) by pushing
it into the matching slots on the Basic Unit
Housing (A). See notes in "Main Unit Housing
Backplate" section for assembly.
2. Slide the Auger into the Slow Juicer Housing.
3. Slide the Frozen Treat Blocker (X) in place over
the Juice/Frozen Treat Auger (V).
FROZEN TREAT PARTS
A Basic Unit Housing
K Chute/Tray
L Pusher
U Juicer Housing
V Juice/Frozen Treat
Auger
NOTE: All juicer/frozen treat attachments are marked
with a "J" to identify which parts are used for juicing.
The parts of each housing are also color coded to help
you identify which parts are used with which housing.
*May be sold separately
A1
14
Emeril Lagasse Pasta & Beyond
X Frozen Treat
Blocker*
Y Juice/Frozen Treat
Seal Cap
A1 Star Extrusion Cap*
X
Y
™
4. Attach the Seal Cap (Y) by twisting it until it
locks in place. The Seal Cap has an arrow that
will be centered on the housing when the Seal
Cap is locked.
5. Place and twist the Star Extrusion Cap (A1)
until it locks into place.
6. Place the Pulp Collector on the outside of
the Basic Unit Housing (refer to the "Frozen
Treat Mode" section).
L
K
U
V
A