Assembling The Pasta Maker - Emeril Lagasse Pasta & Beyond PM-01 Owner's Manual

Parts & Accessories
Assembling the Pasta Maker Housing
1. Hold the Kneading Paddle (D) at a downward
angle and place it into the Mixing Chamber.
2. Slide the Mixing Chamber (B) into place on the
Base Unit (A) while inserting the metal end of the
KneadingPaddle into Base Unit's receptacle.
3. Insert the Auger (F) into the Auger Sleeve (E).Slide
the assembled Auger and Sleeve through the
Mixing Chamber's mouth so that the Auger shaft
fits into the opening of the kneading paddle.
4. Choose one Pasta Disc (G) and place it on the
front tip of the Auger. on the front tip of the Auger.
PASTA MAKER PARTS
A Basic Unit Housing
B Mixing Chamber
C Mixing Chamber Lid
D Kneading Paddle
E Auger Sleeve
NOTE: All pasta parts are marked with a "P" to identify
which attachments are used for pasta making. The
parts of each housing are also color coded to help you
identify which parts are used with which housing.
PASTA DISC TYPES (G)
P1
Penne Spaghetti
10
Emeril Lagasse Pasta & Beyond
F Auger
G Pasta Disc
H Extrusion
Collector Ring
I
Screw Cap
H
I
P2 P3
Linguine
™
5. Place the Extrusion Collector Ring (H) on the
front of the appliance. NOTE: The Extrusion Ring
shaft fits through the front slot of the Mixing
Chamber.
6. Place the Screw Cap (I) on the front of the appliance
and hand tighten until all parts are secure.
7. Place the Mixing Chamber Lid (C) on top
and snap in place. CAUTION: Operating this
appliance with misaligned or missing parts will
cause damage to the appliance.
8. To remove the Mixing Chamber Lid, pinch the
lid's latch and the ridge area to unlock the lid
from the Mixing Chamber.
F
G
P4 P5
Tagliatelle Udon
C
D
E
P6 P7
Angel Hair Fettucine
B
A
P8
Lasagna